CCDLF 8500LD

Document 511-1 SMT Data Line EMI Filters – CCDLF • Available in 10 and 8-line versions • See our PDLF series for 4, 3 and 2-line EMI filters • Exceptional common mode noise attenuation from 15 MHz to 300 MHz; passes signal line data below 300 MHz with minimal attenuation • DC current capacity of 500 or 100 mA. • Excellent electrical isolation (300 Vrms) CCDLF 10000L_ 10 100 5 CCDLF 8000L_ 8 100 5 CCDLF 8500L_ 8 500 5 250 250 200 1. When ordering, please specify termination and packaging codes: CCDLF 8500LD Termination L = RoHS compliant tin-silver-copper over silver-platinum Special order: S = non-RoHS tin-lead (63/37). Packaging D = 13″ machine ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Current rating is for each line. 3. Inductance is per winding, tested at 1 MHz. 4. Operating temperature range -40°C to +85°C. 5. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Typical Response* -10 Attenuation (dB) Current L min DCR max   Part number1 Lines max (mA)2   (µH)3 (mOhms) Designer’s Kit D303 contains four each of all values plus DLF and PDLF filters Core material Ferrite Terminations  RoHS compliant tin-silver-copper over silver-platinum. Other terminations available at additional cost. Weight  CCDLF 8000: 540 mg;  CCDLF 8500: 559 mg; CCDLF 10000: 670 mg Ambient temperature  –40°C to +85°C Storage temperature  Component: –40°C to +85°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat  Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL)  1 (unlimited floor life at